UMX-TPS-TX100 series – User's Manual 130
INFO: Serial port numbering can be found in the Port Numbering section.
Protocol Setting
Command and Response #rs232 #rs-232 #serial #controlprotocol
ç <port>.ControlProtocol=<protocol>
æ <port>.ControlProtocol=<protocol>
Parameters
Parameter description Value Parameter value
<protocol>
Control protocol which is
applied on the selected
serial port
0
1
Example
ç
æ
BAUD Rate Setting
Command and Response
ç <port>.Baudrate=<baudrate>
æ <port>.Baudrate=<baudrate>
Parameters
Parameter description Value Parameter value
<baudrate> BAUD rate value
0 4800
1 7200
2
3 14400
4 19200
5 38400
6
7 115200
Example
ç
æ
Databits Setting
Command and Response
ç <port>.DataBits=<databits>
æ <port>.DataBits=<databits>
Parameters
Parameter description Value Parameter value
<databits> Databits value
8 8
9 9
Example
ç
æ
To Next Page
Loading...
Need help?
General
