UMX-TPS-TX100 series – User's Manual 53
Highlighting the Device
DIFFERENCE:
Show Me button for 5
seconds highlighted in green for 4 seconds
#highlightme
INFO: "Highlight Me" is the default function of the Show Me button. If you assign a different function to the
button, the feature above will not be available.
Serial Tab
If the device is connected via the RS-232 port click on the Query button next to the desired serial port to
display the device’s name and serial number. Double-click on the device or select it and click on the green
Connect button.
ATTENTION! Before the device is connected via the local RS-232 port, make sure that Control mode and LW3
protocol are set on the serial port. Furthermore, the RS-232 port must be free and other serial connection
is not established to the device over that port.
USB Tab
on the device or select it and click on the green Connect button.
Further Tools
The Tools menu contains the following options:
▪ Log Viewer:
▪ Create EDID: This tool opens the Easy EDID Creator wizard which can be used for creating unique EDIDs
in a few simple steps. Functionality is the same as the Easy EDID Creator.
▪ Demo Mode:
and options are the same as a real MX-FR17 device.
The Terminal window is also available by pressing its button on the bottom.
To Next Page
Loading...
Need help?
General
