Ethernet
Ethernet Tab in the Control Menu
Ethernet line by each ports: the speed and the duplexity of the connection.
The following settings are available for the local port:
▪
▪ Reloading factory defaults.
ATTENTION! If the Ethernet port is set to disabled, this may break the connection with the device.
INFO: CPU Ethernet port cannot be disabled.
HTTP Clients (HTTP Post and Put Message Sending)
DIFFERENCE:
package v1.5.0b4.
ATTENTION! This feature means posting or putting HTTP
device. Encrypted transmission (HTTPS) is not supported.
The HTTP Clients tab allows sending HTTP post and put messages to the desired server IP:port no. Control
commands can be set to the target device, but it is not suitable for processing the response (e.g. querying a
#http
HTTP Messaging section.
HTTP Clients tab in the Control/Ethernet menu
Http header or Http body text box, the \r\n is added automatically.
To Next Page
Loading...
Need help?
General
