UMX-TPS-TX100 series – User's Manual 99
Overview
Advanced View
Instructions for the Terminal Application Usage
Terminal Application
install one of them to your control device, for example
Putty or CLI. #terminal
Establishing Connection
Follow the steps for establishing connection to the
receiver:
Step 1.
Step 2. Open the terminal application (e.g. Putty).
Step 3. Add the IP address of the device (default:
port number (6107).
Step 4. Select the Raw connection type, and open the
connection.
Once the terminal window is opened, you can enter
following sections.
LW3 protocol command communication in a terminal window
Protocol Rules
LW3 Tree Structure and Command Structure (examples)
General Rules
▪ All names and parameters are case-sensitive.
▪
▪ The node name can contain the elements of the English alphabet and numbers.
▪
▪ Use the TCP port no. 6107
▪
parameters together) can be max. 800 byte.
▪
▪ The node paths describe the exact location of the node, listing each parent node up to the root.
ç
æ
Command type
Parameters
Command
Response
MEDIA
XP
SourcePortCount
SourcePortStatus
DestinationPortCount
DestinationPortStatus
DestinationPortAutoselect
[...]
I1
I2
I3
I4
I5
O1
AUDIO
UART
IR
GPIO
ETHERNET
EDID
MANAGEMENT
[...]
To Next Page
Loading...
Need help?
General
