Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
4 - 2 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
4. Switch on the battery master switch; Ã p. 4 - 10.
5. Check that
– The bridging plugs are inserted in the sockets for hand-held control;
à p. 10 - 8.
– All emergency stop switches have been reset;
à p. 4 - 24.
6. Check the oil level in the engine and gearbox;
à Maintenance Manual.
7. Check that the parking brake is engaged.
8. Switch on the ignition and check the instruments and displays;
à p. 4 - 11.
9. If necessary, set the brightness,
– on the
ECOS display; Ã p. 4 - 14,
– of the instrument lighting;
à p. 5 - 26.
To Next Page
Loading...
Need help?
General
