Driving modes
6.7 Rigging the auxiliary hoist
6 - 102 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
6.7.10 Transporting the auxiliary hoist
• For transportation, be sure to use a separate vehicle with sufficient load
bearing capacity;
à Dimensions and weights of removable parts, p. 1 - 10.
• Load the separate vehicle in such a way that the weight is evenly
distributed.
• Transport and secure the auxiliary hoist in such a way that no motorists
and cyclists are put at risk.
• Lift the auxiliary hoist onto the separate
vehicle and remove the lifting gear.
• Secure the hoses, e.g. on the slinging
point (3).
• The plug (2) must be inserted in the dummy
socket.
• The hoist rope is secured on the holder (1).
To Next Page
Loading...
Need help?
General
