Basic safety instructions
2.4 Safety instructions for driving the truck crane
Operating Manual GMK6300L 3 112 xxx en 2 - 7
xx.xx.xxxx
2.4 Safety instructions for driving the truck crane
Walk around and inspect the truck crane before you start the vehicle. Check
the condition of the truck crane carefully using the checklists in the operat-
ing manual. Do not assume everything is in working order simply because
it was in working order at the end of the last shift.
Check that all covers and safety devices are fitted properly and that they are
in good condition before starting the vehicle.
Use the appropriate access aids when checking overhead crane parts.
Do not use parts of the crane as access aids.
Keep all handles, steps, step treads and ladders free of dirt, snow and ice.
Keep all electric and hydraulic connections free of dirt. Check the connecting
points for dust, foreign bodies and moisture before installation. This also
applies to protective caps and bridging plugs.
After a lightning strike, always have Manitowoc Crane Care check the truck
crane before you drive the truck crane – even if you do not notice any
impairment to its function. Electronic components may be damaged by
a lightning strike and may fail unexpectedly, either immediately or during
later operation.
Check all operating and control elements in the driver's cab before starting
the engine.
After starting the engine, take note of all the lights and control elements.
After driving, secure the truck crane against unauthorised use.
To Next Page
Loading...
Need help?
General
