Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
Operating Manual GMK6300L 3 112 xxx en 4 - 11
xx.xx.xxxx
Checking the
hand-held control
Check that the hand-held control has been removed, and that bridging plugs
for the hand-held control are inserted into all sockets;
à p. 10 - 8.
4.1.6 Switch on the ignition
H
The ignition can only be switched on if the bridging plugs have been
inserted in all sockets for the hand-held control;
à Hand-held control,
p. 9 - 114.
• Insert the ignition key into the ignition lock and turn the key to position 2.
After switching on the ignition, a lamp test is performed and switching
states are aligned.
To Next Page
Loading...
Need help?
General
