Mercury MerCruiser MIE 8.2L MPI User Manual

454 CID (7.4L) / 502 CID (8.2L) SERVICE MANUAL NUMBER 23
Page 3A-28
90-861326--1 MARCH 1999
Rocker Arm Cover
Removal
It may be necessary to remove exhaust manifold before removing rocker arm cover. Refer
to SECTION 7B for removal. Also remove any component that will interfere with the removal
of the manifold.
1. Disconnect crankcase ventilation hoses.
2. Remove any items that interfere with the removal of rocker arm covers.
3. Remove rocker arm cover.
Installation
1. Clean sealing surfaces on cylinder head and rocker arm cover with degreaser.
2. Place new rocker arm cover gasket in position in rocker arm cover.
72928
a
a-Rocker Arm Cover Gasket
3. Install rocker arm cover. Torque bolts to 71 lb-in. (8 Nm).
4. Reinstall exhaust manifolds with new gaskets, if removed.
5. Reinstall any items which were removed to allow removal of rocker arm covers.
6. Connect crankcase ventilation hoses to rocker arm covers.
7. Start engine and check for oil leaks.
Downloaded from https://needmanual.com/!
Index

Mercury MerCruiser MIE 8.2L MPI Specifications

General

Brand	Mercury
Model	MerCruiser MIE 8.2L MPI
Category	Engine
Language	English