MULTI-PORT FUEL INJECTION DISASSEMBLY AND REASSEMBLY SERVICE MANUAL NUMBER 23
Page 5C-20 90-861326--1 MARCH 1999
454 / 502 Mag MPI and 8.2L MPI Fuel Injectors
NOTICE
Refer to “Precautions” in this section, BEFORE proceeding.
REMOVAL
NOTE: Use care in removing fuel injectors to prevent damage to the electrical connector
and nozzle.
IMPORTANT: The fuel injector is an electrical component. DO NOT soak in any liquid
cleaner or solvent, as damage may result.
IMPORTANT: Modules and sensors are electrical devices easily damaged by contact
with liquid cleaners or solvents. Clean with a dry cloth unless specifically directed
to do otherwise.
1. Remove flame arrestor, throttle body, plenum and fuel rail as outlined in this section.
2. Remove fuel injectors from fuel rail and intake manifold.
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General