MULTI-PORT FUEL INJECTION DISASSEMBLY AND REASSEMBLY SERVICE MANUAL NUMBER 23
Page 5C-44 90-861326--1 MARCH 1999
Fuel Rail and Fuel Injectors
NOTICE
Refer to “Precautions” in this section, BEFORE proceeding.
REMOVAL
1. Relieve fuel pressure from the fuel rail. as previously described.
2. Remove the fuel line from the fuel rail.
3. Remove the plenum as previously described.
4. Disconnect the electrical connector at the injector harness.
5. Disconnect the injector harness connector from the fuel injector.
6. Remove the screws, nut, MAP sensor retainer clip and stud from the fuel rail.
7. Carefully remove the fuel rail from the intake manifold.
75676
75675
75673
d
c
b
a
a-Fuel Rail Stud
b-Fuel Rail Screw
c-Nut
d-MAP Sensor Retainer Clip
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General