VELVET DRIVE 5000V V-DRIVE TRANSMISSION
SERVICE MANUAL NUMBER 23
90-861326--1 MARCH 1999 Page 8C-5
Shift Cable Adjustment
IMPORTANT: Velvet Drive Transmission Warranty is jeopardized if the shift lever pop-
pet ball or spring is permanently removed, if the shift lever is repositioned or changed
in any manner or if remote control and shift cable do not position shift lever exactly
as shown.
73248
a
b
c
d
e
a-Transmission Shift Lever
b-Poppet Ball Must Be Centered In This Detent Hole When Left-hand Propeller
Shaft Rotation Is Desired
c-Poppet Ball Must Be Centered In This Detent Hole When Right-hand Propeller
Shaft Rotation Is Desired
d-Poppet Ball Must Be Centered In This Detent Hole For Neutral Position
e-Install Shift Lever Stud In This Hole When Using Quicksilver Shift Cables
IMPORTANT: The Velvet Drive 5000V is a full reversing transmission. Direction of out-
put/propeller rotation is determined by hookup of shift cable at remote control.
For Left-Hand Propeller Shaft Rotation: Shift cable hookup at remote control must result
in shift cable end guide moving in direction “A” when remote control handle is placed in for-
ward position.
For Right-Hand Propeller Shaft Rotation: Shift cable hookup at remote control must re-
sult in shift cable end guide moving in direction “B” when remote control handle is placed
in forward position.
23242
A
B
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General