IGNITION SYSTEM SERVICE MANUAL NUMBER 23
Page 4B-4 90-861326--1 MARCH 1999
Spark Plugs
CHECKING
1. Disconnect spark plug wires (high tension leads) from spark plugs.
74073
a
a-Spark Plug Boot
NOTE: Use care when removing spark plug wires and boots from spark plugs. Twist the boot
1/2 turn before removing. Firmly grasp and pull on the boot to remove the wire end.
2. Remove spark plugs.
NOTE: A “thin-walled” spark plug socket may be required.
3. Inspect each spark plug for manufacturer and spark plug number. All plugs must be from
the same manufacturer and have the same spark plug number. Refer to “Specifications”
section for spark plug numbers, SECTION 1B.
75084
a
a-Spark Plug Number
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General