454 CID (7.4L) / 502 CID (8.2L) SERVICE MANUAL NUMBER 23
Page 3A-46
90-861326--1 MARCH 1999
Reassembly
1. Lubricate valve guides and valve stems with engine oil.
2. Install each valve in the port from which it was removed or to which it was fitted.
3. Install valve rotators, shims, springs, seals and caps as shown under “Valve Assembly
(Exploded View)” for each particular engine.
4. Using valve spring compressor, compress valve spring and install valve locks (grease
may be used to hold locks in place).
72565
a
a-Valve Spring Compressor (J-8062)
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General