EasyManuals Logo
Home>Mercury>Engine>MerCruiser MIE 8.2L MPI

Mercury MerCruiser MIE 8.2L MPI User Manual

Mercury MerCruiser MIE 8.2L MPI
1027 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #496 background imageLoading...
Page #496 background image
MULTI-PORT FUEL INJECTION DESCRIPTIONS AND SYSTEM OPERATION
SERVICE MANUAL NUMBER 23
90-861326--1 MARCH 1999 Page 5B-37
FUEL PRESSURE REGULATOR ASSEMBLY
MEFI 1 and MEFI 2 Only: The pressure regulator is a diaphragm-operated relief valve with
fuel pump pressure on one side, and regulator spring pressure and intake manifold vacuum
on the other. The regulator’s function is to maintain a constant pressure differential across
the injectors at all times. The pressure regulator compensates for engine load by increasing
fuel pressure as engine vacuum drops.
71716
THROTTLE BODY ASSEMBLY
The throttle body assembly is attached to the plenum, and is used to control air flow into the
engine, thereby controlling engine output. The throttle valves within the throttle body are
opened by the operator through the accelerator controls. During engine idle, the throttle
valves are almost closed, and air flow control is handled by the Idle Air Control (IAC) valve,
described below.
Throttle Position (TP) Sensor
The throttle body also provides the location for mounting the Throttle Position (TP) sensor
for sensing throttle valve position.
72800
a
b
c
a-Throttle Body
b-Idle Air Control (IAC) Valve
c-Throttle Position Sensor
Downloaded from https://needmanual.com/!
Index

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury MerCruiser MIE 8.2L MPI and is the answer not in the manual?

Mercury MerCruiser MIE 8.2L MPI Specifications

General IconGeneral
BrandMercury
ModelMerCruiser MIE 8.2L MPI
CategoryEngine
LanguageEnglish

Related product manuals