Miele DG 408 Series User Manual

Technical Information
15
DG 408x Steam Ovens
Figure 010-2: Screws on the Bottom of the Appliance (DG 4080)
4 Service
4.1 Removing the Appliance from its Niche
1. Open the door.
2. Take the steam generator and equipment out of the oven cavity.
3. Remove the appliance retaining screws (Figure 010-3, Item 1).
4. Slide the appliance out of its niche.
5. Disconnect the appliance from the power supply.
Figure 010-3: Appliance Retaining Screws
4.2 Removing the Side Panels
1. Uninstall the appliance. See Section 010-4.1.
2. Remove the side panel screws; see Figure 010-4, Item 1.
3. Take off the side panel(s).

Miele DG 408 Series Specifications

General

Installation Type	Built-in
Control Type	Electronic
Energy efficiency class	A
Display	Yes
Power consumption	3.6 kW
Color	Stainless steel

Summary

Safety and General Information

Technical Data and Model Specifications

Overview of technical data and comparative model specifications.

Appliance Components and Layouts

Component Overviews and Electrical Diagrams

Diagrams and lists for appliance components and electrical parts.

Casing, Door, Cavity, and Water Systems

Casing, Airflow, and Door Operations

Information on appliance casing, air/vapor ducting, and door service.

Oven Cavity, Floor Heater, and Water Tank

Details on oven cavity components, floor heater, and water tank functions.

Electronics, Faults, and Service Procedures

Fascia, Electronics, and Fault Code Troubleshooting

Fascia panel, electronic overview, and common fault code resolutions.

Service Modes, Programming, and Technical Bulletins

Guidance on service modes, programming, and specific technical bulletins.