Technical Information
45
DG 408x Steam Ovens
3.10 Cooking Program Does Not Start
Cause:
Start is set to “manual”.
Start can be set as manual or automatic. If start was set to “manual”, then the
start of a cooking cycle has to be confirmed manually.
Remedy:
Set start to “automatic”; refer to Section 060-4.1.
3.11 Excessive Steam in the Oven Cavity
Cause:
Steam reduction has been shut off.
Remedy:
Turn on steam reduction; refer to Section 060-4.1.
3.12 Cooked Food Is Not Kept Warm
Cause:
Warming function has been shut off.
Remedy:
Turn on the warming function; refer to Section 060-4.1.
Cause:
Steam reduction has been shut off. Warming is not possible while steam
reduction is shut off.
Remedy:
Turn on steam reduction; refer to Section 060-4.1.
Check if warming is turned on; see Section 060-4.1.
3.13 Recommended Temperatures Are Changed
Cause:
Recommended temperatures can be programmed.
Remedy:
See Section 060-4.1.
3.14 Display Is Hard To Read
Cause:
Display brightness and contrast can be set.
Remedy:
See Section 060-4.1.
3.15 Buzzer at the End of a Cooking Cycle is Too Loud/Soft/Short
Cause:
The melody, volume and duration of the buzzer tone can be set.
Remedy:
See Section 060-4.1.
To Next Page
Loading...
Need help?
General
