Part I Service Scenarios
Repair 90
Log Name Log Description Remarks
Peri_State Peripheral status log recording
system hardware information and
other alarm information
Running status information
about related peripherals is
recorded after the Doppler
process is started.
Monet_Log_Backend_State Backend status log
TEMPORARY_Log.log Unimportant logs containing
massive information
For example, incomplete
display of characters of a
control or thread creation
information
Monet_ERROR_Log Error log Error information in main logs
is extracted to this file,
including startup and shutdown
information.
LargeBuffDump Large file memory related log Large memory log
3.2 Troubleshooting
Note: Deal with the error based on the site situation.
3.2.1 System Power-up Failure
3.2.1.1 Involved Modules or Boards
No. Description Remarks
1. Power adapter /
2 Switch button board /
3 Main board /
4 PC module /
3.2.1.2 Information to Be Collected
No. Information to Be Collected Remarks
1. Power indicator This indicator is on the adapter. If it is on,
the 19 V output is normal. If it is off, the
output is abnormal or the indicator is faulty.
2 19 V indicator This indicator is on the main board.
3 5VSTB indicator This indicator is on the rear side of the main
board and visible after the SSD card cover
is removed.
To Next Page
Loading...
Need help?
General
