Mindray ME8 Service Manual

Part III Appendix
Description of Self-Test Items 251
If the test result is Error, the drive malfunctions.
If the test result is FAIL, brightness control for the main display is abnormal.
 Troubleshooting suggestion
a If the test result is Error, restart the equipment and re-perform the self-test. If the problem
persists, recover the equipment.
b If the test result is FAIL, replace the main display. If the problem persists, replace the main
board.
2.26 Z0804 Backlight Control Test for the Main
Display
 Upper-level test item
Communication Test Between PC Module and MF FPGA
 Test content
The following dialog box appears during the test. The program turns off the backlight for 3 seconds
and then resumes the backlight If you can perceive the changes, click Yes, I Can; otherwise, click
No, I Can't. Click Retry to repeat the preceding procedure.
 Test failure analysis
If the test result is Error, the drive malfunctions.
Backlight control of primary LCD monitor goes wrong if the test fails.
 Troubleshooting suggestion
a If the test result is Error, restart the equipment and re-perform the self-test. If the problem
persists, recover the equipment.
b If the test result is FAIL, replace the main board.
2.27 Z0805 Secondary Screen Board
Communication Test
 Upper-level test item
Communication Monitoring Test
 Test content

Mindray ME8 Specifications

General

Brand	Mindray
Model	ME8
Category	Diagnostic Equipment
Language	English