5 - 7
5.1.4 Standard RAM
(1) DefinitionNote1
This memory is for file registers.
(2) Before using the standard RAM
Format the standard RAM by GX Developer for the Basic model QCPU of function version A.
For the Basic model QCPU of function version B or later, formatting the standard RAM is not required but clearing
standard RAM data is required. For how to clear the data (file register), refer to Section 9.7(3).
(a) Formatting
Select [Online] [Format PLC memory] in GX Developer.
Select "Standard RAM" in "Target memory".
Note1
Figure 5.6 Formatting the standard RAM
Note5.1
The Q00JCPU does not have the standard RAM.
Basic
To Next Page
Loading...
Need help?
General
