Mitsubishi 00JCPU User Manual

9 - 49
9.4 Link Direct Device
(1) Definition
The link direct device is a device for direct access to the link device in a CC-Link IE Controller Network module or
MELSECNET/H network module.
The CPU module can directly write data to or read data from the link device in a CC-Link IE Controller Network
module or MELSECNET/H network module using sequence programs regardless of link refresh.
(2) Specification method and application example
(a) Specification method
Specify a network number and a device number.
*1: Basic model QCPU ••• No.1 to No.239
High Performance model QCPU, Process CPU, Redundant CPU ••• No.1 to No.255
(b) Application example
For link register 10 (W10) of network number 2, "J2\W10" must be used.
For a bit device (X, Y, B, or SB), the digit must be specified.
J1\K1X0,J10\K4B0
Figure 9.51 Specification method
Figure 9.52 Application example
Specification method:
J
\
Device No.
Input
Output
Link relay
Link register
Link special relay
Link special register
Network number
*1
X0 to
Y0 to
B0 to
W0 to
SB0 to
SW0 to
K100
J2\ W10
MOVP
LW 0
LW10
Network module of
network number 2
Example

Mitsubishi 00JCPU Specifications

General

Brand	Mitsubishi
Model	00JCPU
Category	Controller
Language	English