1
2
3
A
6
7
8
Appendix 2 Upgrade by Function Addition
Appendix 2.2 Upgrade of the High Performance model QCPU
APPENDICES
APPX - 8
Appendix 2.2 Upgrade of the High Performance model QCPU
(1) Specifications comparisons
: Available/supported, : Not available/not supported
(2) Availability of new functions depending on the versions of the CPU module
and GX Developer
(To the next page)
TableAPPX.5 Specifications comparisons
Specifications
First 5 digits of serial No.
Function version A Function version B
"02091"
or earlier
"02092"
or later
"02112"
or later
"03051"
or later
"04012"
or later
"16021"
or later
Standard RAM capacity
Q02CPU 64K bytes
Q02HCPU 64K bytes 128K bytes
Q06HCPU 64K bytes 128K bytes
Q12HCPU 64K bytes 256K bytes
Q25HCPU 64K bytes 256K bytes
CPU shared memory
Life extension of SRAM card battery
Support of 2M-byte SRAM card
Support of 4M-byte SRAM card
TableAPPX.6 Availability of new functions depending on the versions of the CPU module and GX Developer
Function
Function
version
First 5 digits of
serial No.
GX Developer
Automatic write to standard ROM ( Section 5.2.7)
A
"02092"
or later
Version 6
or later
External input/output forced on/off ( Section 6.11.3)
Remote password setting ( Section 6.19.2)
Communication with MELSECNET/H remote I/O network ( Section
4.2.1)
Use of interrupt modules ( Section 9.10)
Use of programming modules ( QCPU User's Manual (Hardware
Design, Maintenance and Inspection))
-
Use in multiple CPU systems ( QCPU User's Manual (Multiple CPU
System))
B
"02122"
or later
Version 7
or later
Use of the PC CPU module in multiple CPU systems ( QCPU User's
Manual (Multiple CPU System))
"03051"
or later
Version 7.10L
or later
High-speed interrupt ( Section 6.22)
"04012"
or later
Version 8
or later
Index modification with a device specifying an intelligent function module
( Manual for the intelligent function module that can use dedicated
instructions)
-
Refresh item selection for the COM instruction ( MELSEC-Q/L
Programming Manual (Common Instruction))
-