Mitsubishi 00JCPU User Manual

1
2
3
A
6
7
8
Appendix 2 Upgrade by Function Addition Appendix 2.1 Upgrade of the Basic model QCPU
APPENDICES
APPX - 6
(2) Availability of new functions depending on the versions of the CPU module
and GX Developer
-: Not related to function version, serial No., or GX Developer
*1: When the CPU module instructions supported by GX Developer Version 8 are read by GX Developer Version 7 or earlier, they are
processed as "instruction code error" by the GX Developer.
*2: The Q00JCPU does not support this function.
TableAPPX.3 Availability of new functions depending on the versions of the CPU module and GX Developer
Function
Function
version
First 5 digits of
serial No.
GX Developer
Function block ( GX Developer Version 8 Operating Manual (Function
Block))
A
"04121"
or earlier
Version 8.00A or
later
Structured text (ST) language ( MELSEC-Q/L Programming Manual
(Structured Text))
MELSAP3 ( MELSEC-Q/L/QnA Programming Manual (SFC))
B
"04122"
or later
PID operation
*1
( MELSEC-Q/L/QnA Programming Manual (PID Control
Instructions))
Real number operation
*1
( Section 9.12.3)
Interrupt from intelligent function module ( Section 6.23)
Initial device value automatic setting ( Section 6.26)
Remote password setting ( Section 6.19.2)
E-mail parameter ( Manual for the module that has the E-mail function)
Online change with a pointer (
Section 6.15.2)
Extension of file register R
*2
( Section 9.7)
-
Use in multiple CPU systems ( QCPU User's Manual (Multiple CPU
System))
*2
Version 8.00A or
later
Online change (multiple blocks) ( Section 6.15.2)
Use of CC-Link remote net additional mode ( CC-Link System Master/
Local Module User's Manual)
"06112"
or later
Version 8.03D or
later
Communication with CC-Link IE Controller Network ( CC-Link IE
Controller Network Reference Manual)
--
Version 8.68W or
later

Mitsubishi 00JCPU Specifications

General

Brand	Mitsubishi
Model	00JCPU
Category	Controller
Language	English