+ ProgrammingtheVCRto ReceiveTV Channels
Before your VCR can receive television channels, you need to
program all of"the channels you can receive into your VC,R.
Fortunately, our menu system makes this an easy proce,_s.
This section will also explain some other channel-related
functions. This section explains:
• Programming; channels automatically,
• Using video mute,
• Adding and deleting channels, and
• Selecting a channel.
Programmingchannelsautomatically
Using this process, your VCR will automatically tune in all of the
television stations you can receive. You can later get rid of
unwanted or unused stations.
A specialnote to
cableboxsubscribers
If your local cable box company scrambles some or all stations,
and/or requires you to use a cable box, then your ability to
program channels will be limited. The cable box receives all of
your channels and t_Sen sen&_ only one to yc:ur TV (and your
VCR), usually on channel 3 or 4.
If you are required to use a cable box, you should the chogse
"Cable box only" option on the next page. Your HS-U560 will use
its special Cable Box Control technology to change the channels
on the cable box.
If your cable box or cable system seems incompatible witJ_ your
new VCR, call your cable company. They may be able to provide
solutions to your problems.
_VCR Main Menu
Your choices are:
Program to record
Advanced Features
"Search by time
Use ADJUST to select,
and ENTER.
Press MENU to exit menus
First Time Set-Up
Your choices are:
Set the clock
Customize choices
I[=-]II[O) 4D 1•',,4[:-lie• e_;._ 0 | eI[,_..]lll
Add/delete channels
Set VCR Plus+ Guides
Use ADJUST to select.
and ENTER.
Press MENU for Main Menu
Beforeyoubegin,youshould:
• have completed all connections between your VCR, TV, and
cable or antenna; (see page 12)
• know how to view the picture coming from your VCR; (see
page 23) and
• know how to use the menus. (See page 29.)
To program channels automatically:
0 Press the MENU button on the remote omtrol. You will see
the "VCR Main Menu" on the TV screen.
Move the cursor next to "First Time Set-Up." Turn the shuttle
ring right on the remote control.
O The "First Time _et-Up menu appears on your screen. Turn
the ADJUST dial to mow_ the cursor next; to "Memorize
channels." Turn the shuttle ring right.
31
To Next Page
Loading...
Need help?
General
