Chapter3:OperatingYourVCR Programmingthe VCRto ReceiveTVChannels(cont.)
To add a channel to the super quick view memory:
O Select the channel you want to add, either with the
CHANNEL button or the number buttons.
VCR CH
SOV
0
While the channel number is still on the screen, turn the
shuttle ring right on the remote control. The letters "SQ_i"
will appear, indicating that the channel has been added _o the
super quick view memory.
Now, when you press the Q.V. button, you will cycle through all of
the channels you added to the super quick vic_w memory.
To remove a channel from the super quick view memory:
O Select the channel you want to add, either with the
CHANNEL button, the number buttons, or the Q.V. button.
0
While the channel number is still on the ,_creen, press the
CANCEL button on the remote control or turn the shuttle
ring left. The letters "SQV" will di sappear, :indicating that the
channel has been removed from the super quick view
memory.
i Setting theVCRPlus+Guide Channel Numbers
The VCR Plus+ system allows you to prograra your VCR to record
television shows by simply entering a PlusCode number found
after each program in )'our TV listings.
A special note to cable
box subscribers
VCR Plus+ assigns a unique number to each channel in your
area. You must do a one-time set-up of your VCR using these
assigned guide channel numbers in order to :record correctly when
using the PlusCode numbers.
If your local cable company scrambles some or all stations, and/or
requires you to use a cable box, then you may need to take an
extra step when using VCR Plus+ to program .!/our VCR.
If the HS-U560 is able to control your c_::blebox (and you
have chosen "Cable box only" when you memorized c_ban-
nels), simply foL!ow the instructions below.
If the HS-U560 is unable to control yc,ur cable box (or you
have chosen "C_ble" when you memorized channels), you
will need I:oset all of the VCR Plus+ Channel Guides to ;the
channel on which your cable box sends a signal (usually
channel 3 or 4). Then, when you program, leave your' cable
box turned ON, tuned to the channel .you wish to record.
If you have dffEculty recording5 your cable company may be able
to suffgest an alternative hook-up method thin: will allow you to
use VCR Plus+ without leaving the cable box on, or they may be
able to provide additional solutions. ContacI: ti_em for more help.
36
To Next Page
Loading...
Need help?
General
