®
®
®
123
4 5 6
101 2 13 14 16 18
PerfecTape button (PERFECTAPE)
Press this button to use the PerfecTape TM
feature. The PerfecTape TM feature will test
your videotape and set the VCR to make
the best possible recording with that tape.
record button (REC/OTR)
Press this button once to record until the
end of the tape. Press repeatedly to set the
time for One-Touch Recording (OTR).
one key program button (ONE KEY
PROGRAM)
Press this button to program the VCR to
record.
© jog dial
When the tape is stopped, this dial will
change channels. When the tape is
paused, this dial will advance the tape
frame-by-frame. This; dial can also adjust
tracking and picture vibration. (See page
52.)
pause button (PAUSE)
Press this button to paase a tape when
recording, or to freeze a frame when
viewing a tape.
@
®
®
FluorescentDisplay
(see the illustration on the next page)
l_ck light (LOCK)
This lights up when you use the "Child
Lock" feature.
remain light (REM)
When this is lit, the numbers in the
display show the tape remaining on the
tape, in hours and minutes.
counter display
This displays either the current time, how
long the tape has run, or the amount of
time remaining on the tape. The counter is
automatically set to "0H00M00S" when a
new tape is loaded. The counter will
display ':'-H- -M- -S" when no tape is in the
VCR. The current time is displayed when
the VCR is turned off or when you press
the DISPLAY button. This area also
displays the content,_ of a programmed
recording when you .are programmizag your
VCR. Additionally, it displays the audio
level in decibels for both the left (L) an(]
right (R) audio chan:ae|s.
tape status symbol
This will light up when a tape is in the
VCR. The dashes in the center of the
symbol simulate the _.ovement of the tape
when playing and recording.
To Next Page
Loading...
Need help?
General
