Mitsubishi MELSEC-Q/L User Manual

278
DI, EI, IMASK
6.6 Program Execution Control Instructions
When the Basic model QCPU is used
: Interrupt mask data or head number of the devices where the interrupt mask data is stored (BIN 16 bits)
Function
DI
(1) Disables the execution of an interrupt program until the EI instruction has been executed, even if a start cause for the
interrupt program occurs.
(2) A DI state is entered when power is turned ON or when the CPU module is reset.
EI
The EI instruction is used to clear the interrupt disable state resulting from the execution of the DI instruction, and to
create a state in which the interrupt program designated by the interrupt pointer number certified by the IMASK
instruction can be executed.
When the IMASK instruction is not executed, I32 to I47 are disabled.
6.6.1 DI Interrupt disable
EI Interrupt enable
IMASK Interrupt program mask
6.6.1 DI, EI, IMASK
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn Constants Other
Bit Word Bit Word
–– ––
Basic
Process
High
performance
Redundant Universal LCPU
IMASK
DI
EI
Sequence program
SIMASK
DI
EI
S
S
Sequence program
DI
Sequence program
EI
In
FEND
Interrupt programs
Even if a cause of interrupt occurs during
the execution of the sequence program
between the DI and EI instructions, execution
of the interrupt program is suspended until
the processing of the sequence program
is completed.

Mitsubishi MELSEC-Q/L Specifications

General

Brand	Mitsubishi
Model	MELSEC-Q/L
Category	Controller
Language	English