Modification mode
(6) Modifying the stitching start position
[Example] The stitching start position A point in the stitching data will be modified to the B point as
shown below.
Operation details
1. Selecting the stitching start position movement
* Enter the modification mode. (Refer to
the methods for entering the
modification mode.)
* Press Stitch Data Change and
Stitching Start Position Move .
* Press to set the data.
2. Moving to the modification position and setting the data
* Press the arrow keys to move the
position to the B point.
* Press .
(The sewing start position will be
modified.)
* If is pressed here, the screen
will change to the previous screen.
The work holder will automatically
move to the current stitching start
position. (*1)Take care when the
needle is lowered, etc.
When the modifications are undone,
the work holder will automatically
return to the home position. Take care
when the needle is lowered, etc.
To Next Page
Loading...
Need help?
General
