Depending on how your radio is preprogrammed, you
can also maintain a minimum backlight level on the
radio's front display.
Press the Dimmer button to adjust the brightness
of the display. Long press to toggle between day
and night mode.
Turning the Keypad Tones On or Off
You can enable and disable keypad tones as needed.
• Turning the tones on or off via the preprogrammed
Keypad Mute button:
a) To turn the tones off or on, press the
preprogrammed Keypad Mute button.
• Turning the tones on or off via the radio menu:
a)
or to Mute.
b) Press the Menu Select button directly below
Mute.
The display shows momentary Tones off,
indicating that the tones are disabled or the
display shows momentary Tones on, and you
hear a short tone indicating that the tones are
enabled.
Turning Voice Mute On or Off
You can enable and disable voice transmission, if
needed.
• Turning Voice Mute off or on via the
preprogrammed Voice Mute button:
a) To turn the feature off or on, press the
preprogrammed Voice Mute button.
• Turning Voice Mute on or off via the radio menu:
a)
or to VMut.
b) Press the Menu Select button directly below
VMut.
The display shows momentary Voice mute off, and
you hear a short tone, indicating that the feature is
disabled or the display shows momentary Voice
mute on, and you hear a short tone, indicating that
the feature is enabled.
Using the Time-Out Timer
This feature turns off the transmitter of your radio.
You cannot transmit longer than the preset timer
setting.
134
English
To Next Page
Loading...
Need help?
General
