programmable by a qualified radio
technician.
Adjusting the Volume
1 To increase the volume, rotate the Multi-Function
Knob clockwise.
2 To decrease the volume, rotate this knob
counterclockwise.
The display shows volume bars and volume level
when you change the volume.
Validating Compatibility During Power Up
The radio validates and updates the software and
hardware of your control head(s) during power up.
During validation, the display shows Maintenance
Mode Remote Device
promptly followed by other
maintenance statuses.
Press the Power On/Off Button to reset when the
display shows Update done Please reset upon
completion, or when the display shows Update
failed Please reset when it fails to update.
If the software updates are complete, the radio runs
the usual power up operation.
If the updates are incomplete, the radio runs the
Maintenance Mode and the display shows
Maintenance Mode Remote Device; promptly
followed by other maintenance statuses again.
Note:
If SW incomplete appears, use Flashport
Recovery Tool to update the control heads
before you power on the radio again.
Preparing Your Radio for Use
21
English