Motorola ASTRO APX User Manual

Preparing Your Radio for Use
This section provides simple instructions to prepare
your radio for use.
Turning On the Radio
1
Press the Power Button briefly to power on the
radio.
A
B
After a short time, the red, yellow and green LEDs
light up. The display then shows Zone and
channel text, and menu items display on the
screen.
The backlight turns on to the last selected dim
level.
Note:
Pressing the Power Button before the
LED lights up will be ignored.
If Fail ##/## appears in the display, the
radio will not function until the condition
has been corrected.
If Error ##/## appears, some non-critical
data has been changed. If either of these
displays appear, if the display goes blank,
or if the unit appears to be locked up, see
Helpful Tips on page 144 for more
information.
If Ch mismatch appears, means that either
the Control Head has been connected to
an incompatible transceiver, or vice versa.
If your radio does not power up, contact
your dealer.
2 To turn off the radio, press the Power Button after
the LEDs light up.
Note:
The duration that user must press and hold
the Power Button to turn off the radio is
Preparing Your Radio for Use
20
English

Motorola ASTRO APX Specifications

General

Brand	Motorola
Model	ASTRO APX
Category	Two-Way Radio
Language	English