3 Release the PTT button to listen.
See also Making a Talkgroup Call on page 56 for
details on making a Talkgroup Call.
Receiving and Responding to a Private Call (Trunking
Only)
A Private Call is a call from an individual radio to
another individual radio.
The one-to-one call between the two radios are not
heard by the others in the current talkgroup. The
calling radio automatically verifies that the receiving
radio is active on the system and can display the
caller ID.
Note:
With the inactivity timer enabled (optional),
when there is no response from the receiving
radio, the calling radio exits the call with Menu
Inactive Exit tone after the timer expires.
When you receive a Private Call, you hear two alert
tones and the LED blinks green. The display shows
Call received and the caller alias or ID.
1
Press the Menu Select button directly below Resp
within 20 seconds after the call indicators begin.
If the caller alias is in the call list, the display
shows the caller alias during the call.
If the caller name is not in the call list, the display
shows the caller ID.
2 Press and hold the PTT button to talk. Release the
PTT button to listen.
3
Press to hang up and return to the Home
screen.
Note:
If you press PTT button before pressing the
Menu Select button directly below Resp, your
conversation will be heard by all members of
the talk group.
If 20 seconds pass before you press the Menu
Select button directly below the Resp, you will
not respond privately to the call just received.
Instead, you initiate a Private Call.
See also Making a Private Call (Trunking Only) on
page 57 for details on making a Private Call.
55
English
To Next Page
Loading...
Need help?
General
