Motorola ASTRO APX User Manual

• ARS Server Mode (default mode)
• ARS Non-Server Mode
Note:
The default ARS mode can be changed by a
qualified radio technician using the radio’s
programming software.
Selecting or Changing the ARS Mode
The following methods are options on how to select
or change the ARS Mode. The result of all the
methods is the same. You can use the options
interchangeably depending on your preference and
the programmed functions.
• Selecting or Changing the ARS mode via the radio
menu:
a)
Press and hold or to Chan.
b) Press the Menu Select button directly below
Chan.
The display shows the current zone is not
blinking, and the channel is blinking.
c)
or or press the MFK once and rotate the
MFK to the desired channel.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the
User Login Indicator icon, the zone, and
ARS server channel.
• In ARS Non-Server Mode, the display
shows the User Login Indicator icon, the
zone, and ARS non-server channel.
• If the channel or mode selected is
unprogrammed, the display shows
Unprogrammed. Repeat this step.
d)
Press to confirm the displayed zone and
channel.
• Selecting the ARS mode via the MFK:
a) After the zone you want is displayed, toggle
until the display shows the required channel.
The display shows the current zone is not
blinking, and the channel is blinking.
b) or or press the MFK once and rotate the
MFK to the desired channel.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the
User Login Indicator icon, the zone, and
ARS server channel.
Advanced Features
87
English

Motorola ASTRO APX Specifications

General

Brand	Motorola
Model	ASTRO APX
Category	Two-Way Radio
Language	English