NAiS FP0-C32T User Manual

Control Units
FP0
2-5
Matsushita Automation Controls
2.1 Parts and Terminology
1 7 17 23
Status indicator LEDs
display the operation mode and error statuses (
*
section 2.1.1.1).
2 8 18 24
Mode switch
changes the operation mode (
*
section 2.1.1.2).
3 9 19 25
Tool port (RS232C)
is used to connect a programming tool (
*
section 2.1.1.3).
4 10 20 26
Power supply connector
Supply 24 V DC. It is connected using the power supply cable (AFP0581) that comes with the unit.
5
Input terminal (9-pin)
6
Output terminal (9-pin)
7 8 9 10
The input and output terminals (
5
and
6
) use a terminal block socket made by Phoenix Contact Co.
(product number: 1840434) (
*
section 7.6).
11
Input connector (9-pin)
12
Output connector (9-pin)
The input and output connectors (
11
and
12
) use a connector made by Molex Japan Co. (product
number: 51067 -0900) (
*
section 7.7).
13 16
Expansion hook
is used to secure expansion units. The hook is also used for installation on FP0 flat type mounting
plate (AFP0804).
14
Expansion connector
connects an expansion unit to the internal circuit of the control unit (
*
section 6.1).
15
DIN rail attachment lever
16 17 18 19 20
allows simple attachment to a DIN rail.
The lever is also used for installation on FP0 slim type mounting plate (AFP0803).
21
Input connector (10-pin)
22
Output connector (10-pin)
23 24 25 26
Use a MIL type connector for the input and output connectors (
21
and
22
)(
*
section 7.8).
27
Input connectors (10-pin
×
2)
28
Output connectors (10-pin
×
2)
Use a MIL type connector for the input and output connectors (
27
and
28
)(
*
section 7.8).
29
RS232C port
Use this port to connect to devices with an RS232C port, such as an I.O.P., a bar code reader, or an
image checker, enabling data input and output. (
*
section 7.9).

NAiS FP0-C32T Specifications

General

Brand	NAiS
Model	FP0-C32T
Category	Controller
Language	English