Native Instruments MASCHINE MK3 User Manual

Element Description
MORPHING
MORPH Select to switch morphing ON or OFF mode.
MODE TRAVEL will morph the selected snapshots without syncing to the
grid. The morph will begin instantly instead of waiting until the next
bar begins. The duration of the morph is set using the TIME
parameter.
TARGET will morph in sync to the downbeat when set to Bar, or to
the selected Grid value.
TIME/GRID In TRAVEL mode the duration of the morph will last for the amount
of Bars set here.
In TARGET mode the duration of the morph is set according to the
Grid value set here.
5.6.6 Deleting a Lock Snapshot
Within Extended Lock you can delete a stored Lock snapshot.
To delete a Lock snapshot:
1. Press the CHANNEL or PLUG-IN button.
2. Press SHIFT + LOCK (Ext Lock).
3. Press the pad containing the snapshot you want to delete. If necessary, press Button 7 or
8 to access a Lock snapshot from another bank.
4. Press button 6 DELETE to delete a snapshot.
5. Press the pad containing the snapshot you want to clear.
The snapshot is cleared.
Playing on the Controller
Using Lock Snapshots
MASCHINE - Manual - 271

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs