The Reverb in the Control area.
Parameter Description
ROOM Section
Room This allows you to choose one of four basic characteristics of the
Reverb: General, Bright, Guitar, and Shatter.
Size Adjust the size of the virtual room here.
EQ Section
Low Low band EQ to cut or boost bass frequencies.
High High band EQ to cut or boost high frequencies.
POSITION Section
Pan This pans the dry signal. This is useful because the dry signal
can not be panned after the effect without panning the reverb
itself, which is unnatural.
Stereo This parameter widens the stereo field of the effect.
OUTPUT Section
Freeze Enabling Freeze both mutes the dry signal and traps the current
state of the Reverb output in a temporary buffer to make it last
much longer. This is a powerful tool for playing live: By
simultaneously tweaking the Mix knob nearby, you can create
striking breaks! Setting the EQ’s Low and High controls to
generous values will further increase the effect.
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
Effect Reference
Spatial and Reverb Effects
MASCHINE - Manual - 700
To Next Page
Loading...
Need help?
General
