Native Instruments MASCHINE MK3 User Manual

The Ideas view.
▪ At the top you can see Scene slots. The selected Scene is highlighted.
▪ The selected Scene displays the selected Patterns for the current Scene.
Scene Mode on the Controller
The Scene mode focuses on Scene selection and manipulation.
To enter Scene mode on your controller:
► Press SHIFT + SCENE (Section) to enter Ideas view.
→ The software switches to Scene mode.
In Scene mode you see all Scene slots of the selected Scene bank represented as a square of
4x4 cells:
▪ The highlighted cell indicates the selected Scene slot.
▪ Cells showing a name represent Scene slots containing a Scene.
▪ Empty cells represent empty Scene slots.
This grid of cells shown in the right display corresponds to the pads of your controller, which
have the same functionality as in Scene Arrange mode:
▪ The fully lit pad indicates the selected Scene slot.
▪ Dim lit pads indicate Scene slots containing a Scene.
▪ Unlit pads represent empty Scene slots.
Working with the Arranger
Using Ideas View
MASCHINE - Manual - 758

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs