Parameter Description
Filter Activates a filter on the side-chain input. This filter can be useful to
select only a specific frequency range of the side-chain signal to
control the Plug-in.
Center Freq Adjusts the center frequency of the filter.
Width Adjusts the bandwidth of the filter.
On your controller the outputs available in the SOURCE parameter are labeled as in the
display of the Source selector described above.
For more information on how to use the side-chain input, please refer to section
↑11.1.3, Using the Side-Chain Input.
The Maximizer on the controller: SIDE-CHAIN INPUT page.
12.2 Filtering Effects
12.2.1 EQ
Use the EQ to boost or cut selective frequencies of the audio signal. The EQ is mainly a tool to
tailor your audio signal to taste by cutting out selected frequencies or boosting others, but can
also be used as a DJ-style cut-and-boost effect. Please note that in the Control area and on
your controller the EQ parameters are spread over two pages.
Effect Reference
Filtering Effects
MASCHINE - Manual - 622
To Next Page
Loading...
Need help?
General
