Native Instruments Maschine User Manual

2. Press Button 5 LOOP to activate the loop.
3. Turn Knob 3 START to set the start point of the loop.
4. Turn Knob 4 LENGTH to set the length of the loop.
→
The start and end points of the loop range are set.
►
Turn Knob 1 POSITION to alter the position of the whole loop.
→
The position of the loop range is adjusted.
►
Press Button 4 ALL to loop the whole song.
→
The start and end points of the loop range are set to the range of the whole song.
Activating or Deactivating a Loop Using MASCHINE
To activate a Loop using the controller:
►
Press SHIFT + RESTART (LOOP) to activate or deactivate the loop.
When the loop is activated the Scenes within the Loop range are repeated.
13.3 Playing with Scenes
MASCHINE provides you with various tools to precisely control which Scene has to be played,
and when.
Studio Track or Live Performance?
If you are composing a studio track that you plan to export as is, you can arrange your Scenes
so that your whole track can be played in one go from the very first Scene to the very last one.
Please refer to section ↑4.4.3, Exporting Audio for information on exporting audio.
Creating a Song Using Scenes
Playing with Scenes
MASCHINE - Manual - 737

Native Instruments Maschine Specifications

General

Brand	Native Instruments
Model	Maschine
Category	Recording Equipment
Language	English