Native Instruments Maschine User Manual

Element Description
Diffusion Controls the density of the reflections in the virtual room. A low
diffusion setting makes the reflections sound more distinct, like
closely spaced echoes. A high diffusion setting creates reflections
so close they sound more like noise, in which echoes are
indistinguishable. Available values range from 0.0 to 100.0%
(default: 80.0%).
Pre Delays Adjusts the initial delay between the original signal and the first
reverberant sound. At higher values this can also be used in many
creative ways. Available values can be adjusted in milliseconds from
0.0ms to 250.0ms (default: 0.0ms).
OUTPUT Section
Mix Adjusts the ratio between the effect (wet) signal and original (dry)
signals. Available values range from 0.0 to 100.0% (default:
50.0%).
EQ page
The EQ page contains parameters to adjust the EQ of the reverb.
Element Description
EQ Section
High Cut Adjusts the high frequencies in the reverberated signal. Available
values range in kilohertz from 20.0 kHz to 2.0 kHz (default: 20.0
kHz).
Low Shelf Adjusts the low-frequency content in the reverberated signal.
Available values range in decibels from -0.0 dB to -12.0 dB
(default: -0.0 dB).
Effect Reference
Spatial and Reverb Effects
MASCHINE - Manual - 647

Native Instruments Maschine Specifications

General

Brand	Native Instruments
Model	Maschine
Category	Recording Equipment
Language	English