NETGEAR GC728X User Manual

Configure System Information
104
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
5. Select System> Services > DHCP Snooping > Statistics.
The DHCP Snooping Statistics page displays.
6. To refresh the information on the page, click the Refresh button.
7. To clear all interfaces statistics, click the Clear button.
The following table describes the DHCP snooping statistics.
Set Up PoE Timer Schedules
For information about PoE timer schedules, see Chapter 8, Manage Power over Ethernet.
Table 23. DHCP Snooping Statistics information
Field Description
Interface The interface associated with the rest of the data in the row.
MAC Verify Failures The number of DHCP messages that were dropped because the source MAC address
and client hardware address did not match. MAC address verification is performed only if
it is globally enabled.
Client Ifc Mismatch The number of packets that were dropped by DHCP snooping because the interface and
VLAN on which the packet was received do not match the client’s interface and VLAN
information stored in the binding database.
DHCP Server Msgs
Received
The number of DHCP server messages ((DHCPOFFER, DHCPACK, DHCPNAK,
DHCPRELEASEQUERY) that were dropped on an untrusted port.

NETGEAR GC728X Specifications

General

Brand	NETGEAR
Model	GC728X
Category	Switch
Language	English