Manage Device Security
305
Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
5. Select Security > ACL > ACL Wizard.
The ACL Wizard page displays.
6. Select check box that is associated with the rule.
7. Click the Delete button.
The rule is removed.
ACL Wizard Example
In the following figure, the ACL rule is configured to check for packet matches on ports 4, 5,
and 9 and on LAG 1. Only the Inbound option is valid. Packets that include a source address
in the 192.168.3.0/16 network are permitted to be forwarded by the interfaces. All other
packets are dropped because every ACL includes an implicit deny all rule as the last rule.
For information about the ACL Wizard, see Use the ACL Wizard to Create a Simple ACL on
page 300.
Configure a Basic MAC ACL
A MAC ACL consists of a set of rules that are matched sequentially against a packet. When a
packet meets the match criteria of a rule, the specified rule action (Permit or Deny) is taken,
and the additional rules are not checked for a match.
To Next Page
Loading...
Need help?
General
