NETGEAR Trek PR2000 User Manual

Hardware Setup
11
Trek N300 Travel Router and Range Extender PR2000
Indicator LEDs
Monitor the status of your Trek.
NETGEAR
Power
Internet
WiFi
USB
Wired
Power Off
Wireles
Cover
(rotate
Indicator LEDs
clockwise
to open)
Figure 3. Indicator LEDs
Monitor the status of your Trek using the following LEDs:
Table 1. Status LEDs
Power LED
• Green. The Trek is powered on.
• Off. The
Trek is powered off.
Internet LED • Green. Either the Internet/LAN port is connected physically or a wireless channel is
associated successfully.
• Blinking green. One of the following occurred:
- The Reset button was pressed longer than five seconds.
- A firmware upgrade is in progress.
- The bandwidth limit was exceeded.
• Off.
The Trek is not connected in either wired or wireless mode.

NETGEAR Trek PR2000 Specifications

General

Brand	NETGEAR
Model	Trek PR2000
Category	Network Router
Language	English