Supplemental Information
144
Trek N300 Travel Router and Range Extender PR2000
Technical Specifications
Wireless Wireless communication Enabled
Preset SSID name See Trek label
Security option password Preset password (see Trek label)
Broadcast SSID Enabled
Transmission speed Auto
Note: Maximum wireless signal rate derived from IEEE
Standard 802.11 specifications. Actual throughput varies.
Network conditions and environmental factors, including
volume of network traffic, building materials and
construction, and network overhead, lower actual data
throughput rate.
Country/region United States in the US; otherwise, varies by region
RF channel 2.4 GHz: Auto
Operating mode Up to 300 Mbps
Data rate Best
Output power Full
Table 5. PR2000 Trek specifications
Feature Description
Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP,
and SMB
Power adapter No power adapter.
Input alternating current: 100–240V 50–60 Hz, 0.3A
Dimensions 3.39 in. x 3.31 in. x 1.30 in. (86.5 mm x 86.2 mm x 32 mm)
Weight 0.355 lb (161 g), excluding plug
Operating temperature 0° to 40°C (32º to 104ºF)
Operating humidity 90% maximum relative humidity, noncondensing
Electromagnetic emissions FCC Part 15 Class B
VCCI Class B
EN 55 022 (CISPR 22), Class B
LAN 10BASE-T or 100BASE-Tx, RJ-45
WAN 10BASE-T or 100BASE-Tx, RJ-45
Table 4. Factory default settings (continued)
Feature Default Behavior
To Next Page
Loading...
Need help?
General
