genie ADVANCED Home
54
Trek N300 Travel Router and Range Extender PR2000
WAN Setup
You can configure a DMZ (demilitarized zone) server, change the maximum transmit unit
(MTU) size, and enable the Trek to respond to a ping on the WAN (Internet) port. The Trek
does not support a VPN endpoint, but it allows traffic from VPN endpoints to pass through.
To change the WAN settings:
1. Launch your browser from a computer or wireless device that is connected to the T
rek.
2. Enter www
.routerlogin.net or www.routerlogin.com in the web browser address bar.
The login screen displays.
3. Enter the T
rek user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADV
ANCED > Setup > WAN Setup.
6. Enter the following settings:
• Disable Port Scan and DoS Protection. DoS protection protects your LAN against
denial of service attacks such as Syn flood, Smurf
Attack, Ping of Death, Teardrop
Attack, UDP Flood, ARP Attack, Spoofing ICMP, Null Scan, and many others. By
default, this check box is cleared.
• Default DMZ Server.
A demilitarized zone (DMZ) server can be helpful when you
play online games and use videoconferencing. Be careful when you use this feature
because it makes the firewall security less effective. For more information, see
Default DMZ Server on page 55.
To Next Page
Loading...
Need help?
General
