genie BASIC Settings
49
Trek N300 Travel Router and Range Extender PR2000
• # (number). The order in which the device joined the network.
• IP Address. The IP address that the Trek assigned to this device when it joined the
network. This number can change if a device is disconnected and rejoins the network.
• MAC Address. The unique MAC address for each device does not change. The MAC
address is typically shown on the product label.
• Device Name. If the device name is known, it is shown here.
6. To update this screen, click the Refresh button.
To secure your Trek against WiFi intruders, restrict wireless access. For more information,
see
Set Up a Wireless Access List by MAC Address on page 117.
Profile Settings
If you want to use your Trek in more than one type of Internet connection, a saved profile lets
you make your connections more quickly. Save the profiles when you configure an Internet
connection. Up to 10 profiles can be saved. For more information, see
Internet Setup on
page 37. You can view or delete your profiles after you saved them.
To view or delete the saved profile settings:
1. Launch your browser from a computer or wireless device that is connected to the Trek.
2. Enter www.routerlogin.net or www.routerlogin.com in the web browser address bar.
The login screen displays.
3. Enter the Trek user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
To Next Page
Loading...
Need help?
General
