genie ADVANCED Home
52
Trek N300 Travel Router and Range Extender PR2000
Setup Wizard
The NETGEAR genie installation process is launched the first time you set up the Trek. After
setting up the Trek the first time, if you want to perform this task again, you can run Setup
Wizard from the ADVANCED tab of the genie.
To launch the Setup Wizard:
1. Launch your browser from a computer or wireless device that is connected to the T
rek.
2. Enter www
.routerlogin.net or www.routerlogin.com in the web browser address bar.
The login screen displays.
3. Enter the T
rek user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADV
ANCED > Setup Wizard.
6. Select either the Yes or No, I want to configure the router myself radio button.
If you select the No button, you are taken to the Internet Setup screen. For more
information, see Internet Setup on page 37.
To Next Page
Loading...
Need help?
General
