Get Started with NETGEAR genie
32
Trek N300 Travel Router and Range Extender PR2000
A screen displays requesting the answers to your security questions.
5. Enter the saved answers to your security questions.
6. Click the Continue button.
A screen displays your recovered password.
7. Click the Login again button.
A login screen displays.
8. With your recovered password, log in to the Trek.
Add Wireless Devices or Computers to Your Trek
Connect wireless devices such as desktops, laptops, smartphones, and tablets to your Trek.
You can connect these WiFi devices either manually or using the WPS (Wi-Fi Protected
Setup) method.
For best wireless connection performance, rotate the Trek’s cover clockwise to position its
antenna properly. For more information, see
Antenna Orientation on page 14.
Manual Method
To connect WiFi devices manually to your Trek:
1. From your wireless device, view the available wireless networks.
For more information, see the manual that came with your device.
2. From the list of available wireless networks, select the wireless network name (SSID) of the
Trek.
The SSID is printed on the product label.
3. From your wireless device, initiate a wireless connection.
For more information, see the manual that came with your device.
4. When prompted by your wireless device, enter the wireless network key (password) of the
Trek.
The password is printed on the product label.
5. From the screen of your wireless device, click the appropriate button to continue the
connection procedure.
You are connected wirelessly to the Trek.
6. Repeat Step 1 through Step 5 for each wireless device that you want to connect to the Trek.
To Next Page
Loading...
Need help?
General
