VBA20001-R.3720.A
- A ・ -
logo�Q0310�forGraphic
070509�Gdesign�ito
#B726
#1571×2
#B725
#1544×2
#1033
#1565
#324
#323
#708
#701
#702
#318
#316
#B317
#920
#972
#321×4
#948×2
Direction for positioning
#703
#B735
#1605
Soldering bridge
Solder
Solder
Solder
・
・
Solder [#1003] and [#B317].
Command dial, Shoe base and other small parts
Shoe base
Command dial/Release SW
#1003
・
Mount the rear command dial (#B726) on the top cover, and tighten two screws (#1571).
・
Mount the front command dial (#B725) by positioning it forwards, and tighten two screws (#1544).
・
Assemble the release contact-FPC (#1033) into the front command dial (#B725), rear command dial (#B726),FPC (#1033) into the front command dial (#B725), rear command dial (#B726),the front command dial (#B725), rear command dial (#B726),(#B725), rear command dial (#B726),, rear command dial (#B726),(#B726),
Oil barrier: OS-30MEL