VBA20001-R.3720.A
- A 41 ・ -
logo�Q0310�forGraphic
070509�Gdesign�ito
2. Shooting image adjustment software and Software updates
Adjustments
Replacement
parts
Serial
No.
input
QR
code
data
input
GrGB
differ.
comp.
adj. (G
lter)
Dark
current
adjust-
ment
Sensi-
tivity
adjust-
ment
Shading
adjust-
ment
Gr/Gb
compen-
sation
adj.
(R/B
lter)
Sensi-
tivity
ratio
adjust-
ment
Image
shutter
adjust-
ment
Pixel
defect
compen-
sation
(black)
Pixel
defect
TFT
adjust-
ment
Initial
settings
(Factory
default
settings)
Version
No. /
Serial
No.
Shutter unit
○
Main PCB unit
○
AF FPC unit
DCDCAK
base plate unit
DCDCSZ
base plate unit
Metering FPC unit
DG-PCB unit
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Image sensor holder
unit
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
TFT monitor
○
License sheet
○
*
1
*
2
*
2
*1. When the DG-PCB unit is replaced, be sure to update the rmware before writing the xed value.
*2. When the DG-PCB unit or the image sensor holder unit is replaced, take a picture of the QR code area before
assembly. Then when the adjustment is made, read the QR code with the barcode reader based on the image
adjustment software, and input the data.
*3. There is no menu screen, but when "GrGB differences compensation adjustment (G lter)" is performed, the
serial number and QR code data will be input by selecting either the DG-PCB or image sensor holder unit
replacement.
*
3
Changed Page
△
×2
△(
Addition)
△(
Deletion)
Feb.1st.2008